Shower Curtain

Scrub the curtain manually using laundry soap and a brush.

Apply Malva cleaning paste to rust stains at the bottom and leave for 30 minutes.

Spray a 1:2 mixture of 9% vinegar (or white wine vinegar) and water onto rust stains for 15-20 minutes, then scrub with a brush.

Treat rust with a solution of 3 tablespoons of citric acid per 1 liter of water, then rinse thoroughly.

Apply laundry soap, washing powder, or soda ash to vinyl curtains, leave for 30 minutes, scrub with a brush, and rinse with hot water.

Use Sanox or Sarma gels to remove rust stains by applying for 30 minutes, either undiluted or diluted in hot water.

Treat mold spots with bleach or Sanfor 10-in-1 by soaking the affected areas.

Spray Dos Grass on moldy areas for 30-40 minutes to kill spores with sodium hypochlorite, then scrub and machine wash.

Apply Sanox, Sarma, or Malva to vinyl curtains for 30 minutes before scrubbing and rinsing.

- Spread out the shower curtain after every use to prevent buildup. - Clean the bottom of the curtain periodically without removing it by wiping it with a 1:2 vinegar-to-water solution. - Dispose of the curtain if mold streaks appear, as it may pose a health risk.

Identify the type of stain (rust vs. mold).

Apply the recommended cleaning agent (Malva for rust or bleach-based cleaners for mold) for the specified duration to allow the chemical reaction to break down the buildup.

Use a scrub brush to physically remove the loosened residue before rinsing or washing.